| |
BD Batteries AGM Battery Chargers, Testers, and Analyzers
BD Batteries understands that a dead battery, is worthless. To keep your battery from ever getting to this dreaded state too early in life, keep a good battery charger around and top it off every once in a while. AGM Batteries self discharge at the lowest rate of any battery, less than 1% a week, but a charge on unused batteries twice a year is a good idea.
BD Batteries AGM Battery Charger Lineup
Battery Charging and Test Accessories
Ideal for deep-cycle marine, RV, and industrial batteries, the TRUECHARGE 40+ is designed for batteries from 200 amp-hours and up. The TRUECHARGE 40+ offers three-bank battery charging capability with one charger.
Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 75 and 80 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TRUECHARGE 40+.
|
Ideal for deep-cycle marine, RV, and industrial batteries, the TRUECHARGE 40+ is designed for batteries from 200 amp-hours and up. The TRUECHARGE 40+ offers three-bank battery charging capability with one charger.
Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 75 and 80 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TRUECHARGE 40+.
|
Ideal for deep-cycle marine, RV, and industrial batteries, the TRUECHARGE 20+ is designed for batteries from 100-400 amp-hours and up. The TRUECHARGE 20+ offers three-bank battery charging capability with one charger.
Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 40 and 50 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TRUECHARGE 20+.
|
Ideal for deep-cycle marine, RV, and industrial batteries, the TRUECHARGE 20+ is designed for batteries from 100-400 amp-hours and up. The TRUECHARGE 20+ offers three-bank battery charging capability with one charger.
Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 40 and 50 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TRUECHARGE 20+.
|
The MULTI US 7000 is a primary switch mode battery charger with pulse
maintenance. The MULTI US 7000 is designed to offer maximum life for the
battery. MULTI US 7000 is a member of a family of professional chargers from
CTEK SWEDEN AB. It represents the state-of-the-art of today's technology for
battery charging. The Multi US 7000 Battery Charger is designed for use with
14-150 Ah Batteries.
The MULTI US 7000 is delivered with two different battery leads, one with
clamps and one with eyelet terminals, all colour coded for easy +/-
identification. If the battery is difficult to access, the lead with eyelet
terminals can be mounted to the battery, and the quick connectors are
located so that it is easily reached for charging. You can also purchase
additional leads allowing you to have one lead with eyelet terminals fixed
to all your vehicles with batteries that are difficult to get at, and charge
them simply from the same charger.
|
The MULTI US 3300 is a primary switch mode battery charger with pulse maintenance.
The MULTI US 3300 is designed to offer maximum life for the battery. MULTI US 3300 is
a member of a family of professional chargers from CTEK SWEDEN AB. The US 3300 is designed for batteries with 2-90 Ah capacity.
The MULTI US 3300 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification.
If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging.
You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger.
|
The US 800 is a switch mode battery charger with pulse maintenance and
is a part of a series of professional battery chargers from CTEK
SWEDEN AB. These chargers represent the latest technology
within battery charging. A US 800 gives the battery maximum
life due to proper charging. Designed for batteries with 2-32 Ah Capacity.
ACCESSORIES
The following extra accessories are available for the US 800:
• Connection lead with eyelet terminals.
Available in diameters of 6.4mm or 8.4mm.
• Connection lead with cigarette plug.
• Connection lead with battery terminals.
|
Part No. 4105
20 oz. Fully automatic, 3 voltage settings (28.5/30/31) – VAC in: 90-260, 47-63hz, 1A 3-wire grounded circuit.
Recommended for Concorde batteries as an appropriate charger for lead acid batteries.
Mode of Operation:
Pulse charges a fully discharged battery for fast recovery indicated by an amber LED.
As battery voltage rises, charger automatically switches to constant current charge at 2 amps.
When the battery voltage reaches a preset limit, charger automatically switches to constant potential mode & the green LED light indicates battery is ready for service.
|
Part No. 4159
53 lbs. For Lead Acid and Nickel Cadmium Batteries.
12/24V constant current or constant potential charger. Discharge from 0-50A, Charge at 0-25A. VAC in: 115-230 adj.
Mode of Operation:
Discharge:
Select Mode - Set test time. Connect battery to be tested and turn AC switch on.
Press start and adjust current to test rate.
Displays show elapsed time, voltage and current. Meters show rate of discharge, end of discharge voltage, and timer shows total elapsed time. Voltmeter shows end-point, voltage, timer shows elapsed time. Displays hold test data until reset.
Charge:
Select Mode - Constant Potential of Constant Current. Connect battery. Set timer. Select charging voltage. Turn AC switch on, voltmeter reads open circuit voltage of battery. Press start and adjust charge current. In Constant Potential (voltage) mode, charge current will taper as the battery voltage rises.
|
Part No. 4142
Charges one or two Lead Acid and Nickel Cadmium Batteries
33 lbs.
12/24V constant current or constant potential (voltage) charger.
Charge at 0-25A, dual isolated output, VAC in: 120-220, 50/60 hz.
Mode of Operation:
Select Mode - Constant Potential or Constant Current. Connect battery(ies). Set timer. Select charging voltage. Turn AC switch on, voltmeter reads open circuit voltage of battery.
Press start and adjust charge current. In Constant Potential (voltage) mode, charge current will taper as the battery voltage rises.
|
Part No. 4126
34 lbs. For Lead Acid and Nickel Cadmium Batteries.
12V/24V, adjustable constant current discharge from 0-50A. VAC in: 120, 50/60hz, 15A (or 190-270 VAC, 50/60hz, 8A)
Mode of Operation:
Select Mode - Set end point current voltage and test time.
Connect battery to be tested and turn AC switch on.
Press start and adjust current to test rate.
Displays show elapsed time, voltage and current. Green lamp illuminates when the battery capacity is above the preset requirement. Meters show rate of discharge, end of discharge voltage, and timer shows total elapsed time. Red lamp illuminates if battery fails to meet preset limits. Voltmeter shows endpoint voltage, timer shows elapsed time. Displays hold test data until reset.
|
|
|
|
