Large Custom Scalable Uninterruptable Power Supplies OR Custom UPS Systems
Due to the the inefficiencies and the scale of the United States power grid, it is becoming more and more necessary to protect sensitive electronics and systems from power failures, outages, and other anomolies like sags, lags, spikes, noise, and transients. These systems also work for freezers, and traveling systems that need mobile power for short periods of time.
Click here for an explanation of lags, sags, spikes, noise, and more.
To connect these boxes together, wiring, and associated venting are required to comply with NEC code standards. Properly terminated wires with crimped or soldered lugs, heatshrinks and terminal covers greatly reduce the liklihood of sparks inside the battery box.
BD Batteries supplies both metal pipe (permanent to code installations) and flexible metal piping for venting batteries (mobile applications).
Click here for AGM battery chargers.
When selecting a charger for a UPS system, it is imperative to aquire a high quality, 3 step charger, with a quality computer interface. This allows the charger to determine the state of charge of the battery and literally turn itself off when not needed rather than overcharging and "cooking" your batteries.
To keep your batteries charged, select a charger well in excess of your usage needs. This will keep the charger from working outside of it's efficient arena, as well as minimize the losses due to heat. A good rule of thumb is selection of a charger at least 20% larger than your peak amperage, voltage, or wattage requirements. Some of our battery chargers can be stacked or wired in parallel to increase the available charging amperage to adequate levels.
Please look at these models for charging a battery pack indefinitely. Each has a computer designed to "Float" a battery at full charge.
To calculate the load and battery bank size use one of our convenient calculators. The battery calculators on our site all use AGM batteries and are designed to have your batteries discharge to 50% of their capacity. DO NOT TRY THIS WITH YOUR AVERAGE AUTOMOTIVE BATTERY AS YOU WILL DAMAGE IT IRREPPERABLY!
BD Batteries - A Broomfield-Designers Company
Serving the Local Colorado Community 9-5 Mountain & Emergencies P. 303-800-4725 F. 303-600-9726
Serving the Buffalo and the Great Lakes Communities 9-5 Eastern & Emergencies P. 716-531-4875
Mailing Address: 5023 West 120th Ave. #138, Broomfield, CO 80020
OUR DENVER WAREHOUSE IS MOVING TO A NEW LOCATION AT THIS TIME.
WE WERE SCHEDULED TO REOPEN OUR BRICK AND MORTAR BATTERY WAREHOUSE IN EARLY 2011.
IN THE MEAN TIME OUR WEBSITE AND PHONES OPERATE FINE!
We do thank the public for the outreach of concern, and votes of confidence.
Do call Lorene prior to schedule used battery pickups, new battery dropoffs, etc. by appointment.
The information contain on this deep cycle AGM batteries website is deemed reliable, but not guaranteed. Please verify specific information on marine AGM batteries, rv AGM batteries or auto AGM batteries listed here by calling us direct. We are proud to offer the highest quality AGM batteries and hope you will consider using our deep cycle AGM batteries in the near future!
Click here for an explanation of lags, sags, spikes, noise, and more.
